Study of Compared Characterization of SBS Polymer Modified Bitumen

葉光華　王忠偉　譚躍輝　

摘　要：將苯乙烯-丁二烯-苯乙烯(SBS)聚合物改性瀝青用常規試驗方法(針入度、軟化點、動粘度及脆點)與動態力學分析方法所得到的試驗結果進行比較研究.結果表明,SBS聚合物能有效提高瀝青的粘彈性,但這種提高作用不能用常規方法進行檢驗,只能通過動態力學分析得到證實;用常規方法和動態力學方法所測得的參數之間存在一定的相關關系;針入度、軟化點等參數不能用來評估SBS改性瀝青的流變特性.
關鍵詞：道路材料; 聚合物改性瀝青; SBS聚合物; 流變特性; 常規試驗方法; 動態力學分析
分類號：U414.1; O631　文獻標識碼：A
文章編號：1000-2502(2002)01-0078-04

參考文獻：

［1］Rowlett R D, Martinez D F. Performance of Asphalt Modifiers: Classification of Modifiers and Literature Review[A]. Strategic Highway Research Program[C]. Center for Construction Materials Technology, Southwestern Laboratories, Houston, Texas, 1990.
［2］Isacsson U, Lu X. Testing and Appraisal of Polymer Modified Road Bitumens-State of the Art[J]. Materials and Structures, 1995, 28:129-139.
［3］Mulder E A, Whiteoak C D. An Objective Assessment of the In-Service Performance of Thermoplastic Rubber Modified Bitumens for Road Applications[M]. 16th ARRB Conference, Perth, Western Australia, 1992.
［4］Lewadowski L H. Polymer Modification of Paving Asphalt Binders[J]. Rubber Chemistry and Technology,1994,67:347-380.
［5］王忠偉,楊云波,呂曉虎.SBS聚合物改性瀝青的試驗分析[J].中南林學院學報,2001,21(2):50-58.
［6］Whiteoak D. The Shell Bitumen Handbook[M].Shell Bitumen, UK, 1991.102.